LIVE Alarm Node: Edit Volume Level

1. Log in to WEB version of Live Display.
2. Once logged in, click on the top left hamburger menu (three horizontal lines).
   
3. From the dropdown menu, select:
4. Configuration > Device Settings
5. Under Alarm Node Volume, click on the current volume level (it can vary from LOW, MEDIUM, or HIGH).
   
6. Then, select one of the desired levels you want to set the alarm up with. 
   
7. Finally, scroll to the bottom of this screen, and select SAVE (bottom right).
   

NEXT STEPS:

1. To confirm the settings were saved, let's inspect the Mobile App version of the Live Display Account.
2. Launch Mobile Live Display, and enter:
3. Customer ID followed by Live Access user pin.
4. Click on the Hamburger menu found on the top left of the home page.
5. From the drop down, select 'Alarm Nodes'.
6. You will get to the list of the Alarm Nodes registered to this Account Site.
7. Select the alarm node you wish to inspect.
8. On the next screen, click on 'Info & Settings' (bottom center).
9. Under the first section titled 'General', you will see the current Volume level.
   
10. *Please note, you can only edit the volume level using WEB version of Live Display.